Last Saturday was very nice in Blackheath. A lot of thermaling, I met plenty of nice people and have flown with birds under the cloudbase. I had also opportunity to fly Passion and Ginie race in more turbulent conditions. It is so warm in the pod harness! Pure fun.
Enjoy a short movie from this day below:
Blackheath from lukastu on Vimeo.
Tuesday, 27 August 2013
Friday, 16 August 2013
Camden - trip to the west
Hi!
Last weekend I had very nice flight with Brett to the west from Camden. Take off was difficult with nil wind... nil wind is not a problem but when it is very light and changing its direction every few seconds then it becomes tricky. Running like hell helped and after two attempts I was finally in the air.
I also could not stop the engine between take offs because pullstarter's string broke and when the engine started I was left with the handle in my hand. Funny feeling.
In the air we felt last thermal kicks but it was very pleasant after all. We have gone a few kilometers to the west to explore the area then climbed our usual ridge and come back home. 80 minutes in a little bumpy air and testing paramotor after engine out on the way back. I also flew over the field where I had emergency landing&take off last weekend. Happy and tired I was on the way back home about 6 p.m.
Canon G15 is very nice camera. I have small hands so it is easy to use it even with gloves on. Picture quality is amazing - this is what I was looking for.
Our trip, almost 40km:
Wasp paramotor with vario, GPS, SPOT and compass:
Brett is leading to the west:
Brett again:
Such a nice afternoon!
Heading south, dodgy area for emergency landing:
Heading east, this is west end of the ridge:
Houses, houses, houses...
I love those long shadows:
Someones home on the edge of the ridge:
Lakes
Field stroked with red is the one where I had emergency landing last weekend:
Brett after landing packing his wing:
Just before sunset the fog started to appear:
Red-blue sunset in the end of amazing flying day:
Brett and his Nirvana Rodeo:
This is what I found when doing after flight inspection:
$20 later it was welded in the local car station.
Last weekend I had very nice flight with Brett to the west from Camden. Take off was difficult with nil wind... nil wind is not a problem but when it is very light and changing its direction every few seconds then it becomes tricky. Running like hell helped and after two attempts I was finally in the air.
I also could not stop the engine between take offs because pullstarter's string broke and when the engine started I was left with the handle in my hand. Funny feeling.
In the air we felt last thermal kicks but it was very pleasant after all. We have gone a few kilometers to the west to explore the area then climbed our usual ridge and come back home. 80 minutes in a little bumpy air and testing paramotor after engine out on the way back. I also flew over the field where I had emergency landing&take off last weekend. Happy and tired I was on the way back home about 6 p.m.
Canon G15 is very nice camera. I have small hands so it is easy to use it even with gloves on. Picture quality is amazing - this is what I was looking for.
Our trip, almost 40km:
Wasp paramotor with vario, GPS, SPOT and compass:
Brett is leading to the west:
Brett again:
Such a nice afternoon!
Heading south, dodgy area for emergency landing:
Heading east, this is west end of the ridge:
Houses, houses, houses...
I love those long shadows:
Someones home on the edge of the ridge:
View to the north-east. Sydney on the horizon:
Lakes
Field stroked with red is the one where I had emergency landing last weekend:
Brett after landing packing his wing:
Construction site:
Just before sunset the fog started to appear:
Red-blue sunset in the end of amazing flying day:
Brett and his Nirvana Rodeo:
This is what I found when doing after flight inspection:
$20 later it was welded in the local car station.
Thursday, 8 August 2013
Moster's death
Yesterday was not the luckiest day of my paramotoring life. The beginning was pretty good but the end disappointed me.
My Moster died in the afternoon.
Here is a short story:
After work I came to the field with fresh petrol mixed with Motul 800 - as always.
I wanted to prepare myself to the competitions and adjust the speed system. After take off I realised that the speed system line is a bit too short and I have to extend it.
The air was a bit bumpy. The wind gradient was not constant and the thermals were bubbling. I did not take much risk and after about 30 minutes I decided to set up the final approach and land.
My peace of mind was disturbed about 20 meters above the ground, the engine stopped and the gliding final let begun.
After an emergency landing I did a careful check of the engine.
What has happened? How did this happen? Why did this happen? And the most important one - why did this happen to me?
The first thought was - I seized the engine. Quick glance at the plug - it is black!
At the same time my friend noticed that the connecting rod punched a hole in the engine
I disassembled the engine to see how the piston looks like. The cylinder looks fine, the bearings are fine... the cause of the emergency landing was the broken connection rod
Fly safely and check your engines!
This article is a translation of Lipton's article published on Leszek's blog
My Moster died in the afternoon.
Here is a short story:
After work I came to the field with fresh petrol mixed with Motul 800 - as always.
I wanted to prepare myself to the competitions and adjust the speed system. After take off I realised that the speed system line is a bit too short and I have to extend it.
The air was a bit bumpy. The wind gradient was not constant and the thermals were bubbling. I did not take much risk and after about 30 minutes I decided to set up the final approach and land.
My peace of mind was disturbed about 20 meters above the ground, the engine stopped and the gliding final let begun.
After an emergency landing I did a careful check of the engine.
What has happened? How did this happen? Why did this happen? And the most important one - why did this happen to me?
The first thought was - I seized the engine. Quick glance at the plug - it is black!
At the same time my friend noticed that the connecting rod punched a hole in the engine
I disassembled the engine to see how the piston looks like. The cylinder looks fine, the bearings are fine... the cause of the emergency landing was the broken connection rod
With Roman Kapler's help ( Motoroma ) I was able to investigate the cause.
The reason was that the manufacturer used slightly too small bearing (19,6mm) and in the extreme position of the connecting rod small offset appeared.
It would be good enough to use a 22mm bearing and this would not happen. 30h airtime ago when I was replacing worn parts everything worked fine.
Next time you will disassemble your paramotor to service pay attention to this detail.
As far as I know it is not the first instance of this kind of failure.
Fly safely and check your engines!
This article is a translation of Lipton's article published on Leszek's blog
Thursday, 1 August 2013
Paramania GTX impressions
Paramania GTX 22 review
I an opportunity to test Paramania GTX 22 in flight. To he honest I never flown such a small wing because of my takeoff weight which is 140kg. In case of this wing the takeoff weight is up to 160kg!
Before the flight I was worrying if I will be able to take off, how will the wing behave with such a bug wingload, how will the landing look like? The wind was about 10 knots with gusts. In the evening the wind dropped down and I decided to have a go on GTX 22 despite the gusts.
Take off:
Because of a small size the wing in above the head instantly during take off. Short run, a little bit of the brakes and I am in the air. The climb rate is surprisingly good so i am lowering the throttle a little. It is so easy to take off!
Flight:
During the flight in turbulent air I had to keep the brakes because the wing has got a tendency to swing to the sides. Pulling the brakes a little solves this problem and the wing becomes more stable. To make a full 360 it is enough to pull just a few centimetres. After the turn the wing comes to level flight without any problems.
The middle of the wing is stable but the tips are working and this is what is causing the tendency to swing to the sides.
Speed is very good. The best part of the flight was when I turned against the wind and didn't see a difference in speed. This wing is really fast!
This wing generates plenty of lift. I was flying similar RPM in level flight as I am using when flying my Nucleon 29. Before the flight I was convinced that the pilots who are flying small wings and claiming that they have plenty of lift are exadurating... now I know that they have a point.
Landing:
Slow and easy. With nil wind we were able to slow the wing almost to full stop during the landing. The trick is same as on the rest of the reflex wings: descend on high speed and flare the speed just above the ground.
Summary:
Paramania GTX is a wing which I have to return to the dealer because I got it only for testing purposes. It takes off nicely, turns easily and generates plenty of lift. Perfect to go crazy in the air. The main disadventage is the price. I do not recommend this wind to the beginner paramotor pilots but it will be fun for more experienced ones.
This article is the translation of Leszek's article.
Sunday, 28 July 2013
Saturday flying - movie
Despite 30km/h wind last Saturday I had two flights in Woonona. Quite a few pilots arrived but some of them did not bother to set up the gear.
Short movie, enjoy!
Winter/windy paramotor Saturday from lukastu on Vimeo.
Short movie, enjoy!
Winter/windy paramotor Saturday from lukastu on Vimeo.
Thursday, 25 July 2013
EC Extreme introduced new throttle handles
Paramotor Throttle handle
ECExtreme has introduced new throttle handle
New design is useful and can be used by both left and right handed pilots. Transition from one side to the other is as simple as readjustment of the holding strap.
Additionally the number of inner cables has been reduced to one. Now the outer part works also as the ground.
Spare cable can be used to plug RPM meter or other devices.
New shape is comfortable and easy to play with for pilots with either big or small hands.
The price for new throttle is ~$150 USD (450 PLN)
The kill switch is mounted in easily reachable place during the flight as well as on the ground.
Once new owner took care of the business, EC Extreme is working to improve pilots safety. Also website is being updated on more frequent basis.
EC Extreme
This article is a translation of Leszek's article.
Thursday, 18 July 2013
Reflex glider - how does it work - part 3/4
Why reflex airfoil is 'safe'?
The problem with the certification of the reflex wings is that the whole weight of the pilot and gear is equalised by the lift force generated on the leading edge of the airfoil. In this case it is very difficult to pull the collapse deliberately because even when the test pilot is pulling the A risers with his full weight he is not able to add more force upon them then his own weight acting on the risers.
This is the reason why reflex wings cannot pass the certification tests - they cannot be tested. The tests define how quickly and in what configuration the wing is coming out the deformations, not how easy it is to cause the deformation.
For example test pilot of Dudek Synthesis (and the author of the original text in Polish) was not able to cause 50% collapse on the full open trimmers so the wing could not pass the test.
Another thing is that in the wings with reflex airfoil the surface which is generating the lift force is much smaller in comparison to the classic airfoil. From this we can conclude that to equalize the pilots weight the effective wing load will be higher in comparison to the classic airfoils. And this is causing reflex airfoils to fly faster then the classic ones.
In the above picture we can see the lift force distribution on the reflex wing without speedbar (angle of attack 6 degrees )on the left hand side and with full speedbar on the right hand side (angle of attack 2 degrees).
We can see how the lift force moves forward with speedbar loading only A lines and making the wing more resistant to deformations.
In summary reflex wings are more stable, more resistant to deformations, faster. The downside is worse gliding ratio, certification is impossible in some configurations according to nowadays certification rules. Wing design is more complex as well.
The complexity in wing design are caused by the fact to control the glider we use trailing edge. When the pilot pulls the brakes the wing is lowering the trailing edge and the airfoil is not reflex anymore. In reflex mode the whole lift force is acting on the leading edge. When we pull the brakes (even a little) then lift force is also generated on the trailing edge. While not increasing the drag force enough it can cause a turn in the opposite way that pilot wants. For example we pull right hand brake in the reflex mode, additional lift force is generated on the trailing edge of the right wing (total sum of lift forces on the right half of the wing is higher then on the left), right wing is going up according to the increased lift force and we turn left. Normally this would be overcompensated by drag force generated on the right half of the wing (in classic airfoils) but in reflex mode the drag force can be not enough. In this way we can have left turn caused by pulling the right brake.
The other problem is that pulling the brake we kill the reflex airfoil characteristics which is causing the center of the pressure to move backward. This can result in wing tip collapses when pulling the brake even a little in reflex mode.
This is the end of part 3.
The author of the original text is Zbigniew Gotkiewicz. It was presented on www.paramotor.com.pl Leszek's blog
Subscribe to:
Posts (Atom)